I've spun the nut off using the impact. Problem is the basket won't fit through the opening in the crankcase cover. I have no idea why Honda did this. This must be a design error.
I believe the gears on the outer basket are too large to fit through the clutch cover, not certain though. In any case, it's not difficult to remove the right case cover. Just insure you pay attention to reinstalling the kick starter mechanism as there are alignment marks.
Drain the tranny fluid and coolant. Remove your kick starter and remove the water hose. You may need to remove the bolt from your rear brake pedal for clearance. Fairly straight forward job.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.