help me and my clutch!!!!

[reddragon737]

i have a 2000 125sx, this problem just started... when i have the clutch lever pulled all the way in and the bike in gear it the engine is still engaging...i flushed the hydraulic fluid, thinking that may solve the problem, but it made no difference...any suggestions, can i tighten it up somehow????

help

 

[Masterphil]

Do not post the same thread in multiple forums, Thanks.

 

[overbore]

I learned alot about ktm clutches a few years ago and most was on my own by
tearing it apart and looking at measurements.Most like being a 2000 and if its used
very much the basket is grooved which means a visual inspection.First look thru the
oil fill hole and see if you can see the clutch move when you pull the lever and if it does
then you either need to re shim with another gasket on slave cylinder or basket is notched.
overbore.