I have some questions about the cr250...
1. Are there any known issues with the '01 that I should keep an eye on or look for?
2. Are the '97-01 cr250's all the same?
3. What is the proper jetting and air screw setting for a '01 cr250 with the stock bore, stock carb, FMF pipe, reeds, and aftermarket filter? The previous owner mentioned that the bike would foul plugs if left idling for a while, or if you just putt around on it. It always starts first kick without the choke and seems to stumble a little on the lowend, but it's really strong from midrange to topend.
I plan to check/clean the filter, reeds, and carb in a few days so I wanted to confirm the settings before I tear into it. Any info would be greatly appriciated. Thanks in advance.
1. Are there any known issues with the '01 that I should keep an eye on or look for?
2. Are the '97-01 cr250's all the same?
3. What is the proper jetting and air screw setting for a '01 cr250 with the stock bore, stock carb, FMF pipe, reeds, and aftermarket filter? The previous owner mentioned that the bike would foul plugs if left idling for a while, or if you just putt around on it. It always starts first kick without the choke and seems to stumble a little on the lowend, but it's really strong from midrange to topend.
I plan to check/clean the filter, reeds, and carb in a few days so I wanted to confirm the settings before I tear into it. Any info would be greatly appriciated. Thanks in advance.