1982 IT175 piston

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 3, 2010

• #1

Hi all. Has anyone done a complete investigation to see if you can use an IT200 piston in a 1982/3 IT175?
The part #s are the same except the prefix and the std. piston rings are the same, indicating the the bores are the same. I suppose what is the most important would be the distance from the wrist pin to the top of the piston..... :think:

Eric

 

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 19, 2010

• Thread starter
• #2

So, nobody knows about this????

Eric

 

Someone

Member

Mar 12, 2001

865

0

• Apr 19, 2010

• #3

Sounds like you need to give Wiseco a call.

 

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 19, 2010

• Thread starter
• #4

Wiseco does not make a piston for this model of IT175. Just the older ones and the 200's.

Eric

 

M

mideastrider

~SPONSOR~

Jul 8, 2006

827

1

• Apr 19, 2010

• #5

I'm not sure but I believe the ristpin/bearing are not the same diameter.

 

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 20, 2010

• Thread starter
• #6

That would surely be a deal breaker

Eric

 

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 20, 2010

• Thread starter
• #7

Just looked in Babbitts and it shows the same wrist pin but a different needle bearing.
Same rings too.

Eric

 

E

Eric Kropp

Member

Mar 14, 2010

38

0

• Apr 23, 2010

• Thread starter
• #8

Yahooooo!!!!

Was looking at another post and saw a ProX brand piston in the discussion. So I did a little research and found that they have a piston for the 1982/83 IT's for a very reasonable price :cool:

Eric<><