02'Cr Rider
~SPONSOR~
- Nov 20, 2001
- 216
- 0
After visiting a few dike bike sites I came across a thread about disconnecting the TPS on 250 RM's.I sure this is not something new,but wanted to post it for those looking for more power.
I disconnected the carb TPS only on my 2003 RM250,let me tell what the results where.It made the bike pull a little better on low end but made a big difference in mid to top with a lot more over-rev.The bike pulls harder,and cleans up the jetting too.This Mod does not do any damage or cause any problems.So for the guys that want a little more over-rev for free try this mod.I found one link from motocross.com that had a write up on a 01' RM250. :cool:
I disconnected the carb TPS only on my 2003 RM250,let me tell what the results where.It made the bike pull a little better on low end but made a big difference in mid to top with a lot more over-rev.The bike pulls harder,and cleans up the jetting too.This Mod does not do any damage or cause any problems.So for the guys that want a little more over-rev for free try this mod.I found one link from motocross.com that had a write up on a 01' RM250. :cool: