shovelshort
Member
- Sep 2, 2005
- 4
- 0
Ok, here's a dumb one. Recently pulled the motor out of my 96' RM250 for service and put it back in. While hooking everything back up I realized I don't know which side of the front sprocket is supposed to be facing the bike. Manual doesn't say and the pictures are hard to tell. BikeBandit is hard to see also. :bang:
The sprocket is flat on one side and the other side has a lip coming out almost like a wide washer welded to it. Could anyone take a peek at their bike and let me know?
I know, line it up with the rear sprocket. Swingarm is at my buddies getting new bearings pressed.
Also, how do you know what brand of muffler you have if there is no sticker? Bought the bike used. It has a Pro Circuit headpipe so I am assuming the muffler is Pro Circuit too. I want to repack it.
The sprocket is flat on one side and the other side has a lip coming out almost like a wide washer welded to it. Could anyone take a peek at their bike and let me know?
I know, line it up with the rear sprocket. Swingarm is at my buddies getting new bearings pressed.
Also, how do you know what brand of muffler you have if there is no sticker? Bought the bike used. It has a Pro Circuit headpipe so I am assuming the muffler is Pro Circuit too. I want to repack it.
