97 CR250 Chain & Sprocket Question

[PGHRam]

Hey guys,

I just tore the bike down for some maintenance. I need to replace the chain and sprockets and don't know what to get. I ride trails only and I'm looking for the easiest replacement.
Any suggestions? And are the ones on ebay any good?

http://cgi.ebay.com/ebaymotors/Hond...0616276QQptZMotorcyclesQ5fPartsQ5fAccessories

Thanks.

 

[NJGregsCR]

I also have a CR250R, 1997. I recently changed to a 51 tooth rear and left the front sprocket stock (14T I think?).
I also put on a new O-ring chain while I had it all apart.

I bought everything trhu a local dealer, and his price was as good as ebay. I really like to support the local guys when possible.

Although the sprocket made a small difference in the low speed ridability, the biggest improvements were felt when I put in a 14oz flywheel weight and a recent Gnarly FMF pipe. The bike really crawls around the woods now with much smoother power delivery.

regards, Greg

 

[PGHRam]

Thanks Greg. I talked to the local guy. He said to go with an alloy rear and steel front. I think the sprockets and chain are going to run me $120.

Thanks again.