dragging/slipping
hey rich, or anyone
i have a 99 rm125 i had a severe case of dragging in the past so i replaced the hub and basket, and seemed to clear it up. Recently it acted up again. So i replaced the lever and perch, how should i adjust this properly to have no slippage or draggage. I noticed a slight drag out of the corner and slippage until i got in the higher speeds. Is it most likely to be my shify release lever is worn which is cuase drag, and the play is incorrectly adjusted which caused the slippage. What type of oil should i be running,(you used atf in your 150), should i run ATF type F, if so what brand. I am running Polaris Predator wet clutch oil. Also how should i adjust the clutch for no slippage or dragging.
apreciate any help