Tankerblade

Member
May 23, 2008
12
0
I have a 82 Cr-480 and it doesnt have a spark. i got a new plug and a new coil. and i'm still not getting it. is there anyway to check to see if the CDI or the pulse generator is working properly with a voltmeter thing?

Thanks tyler
 

Circleburner

Member
Aug 2, 2008
23
0
The grounds are: the coil mounted to bare metal on the frame, the engine grounded to the frame. Another thing to check if this doesn't work is pull the flywheel and make sure the magnets aren't rusted. Clean them up with scotch brite.
 

Tankerblade

Member
May 23, 2008
12
0
the coil and the kill switch is good. what should i look for on the stator and the flywheel?
also it sounds like air is being pushed back through the carb and airbox when i push the kickstarter. any ideas whats wrong with that
 
Last edited:

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom