Fork Seal Replacement 2002 RM 125

Joined
Apr 27, 2007
Messages
3
Likes
0
#1
I first want to say thank you for this site. It's people like you guys who keep guys like me from pulling all my hair out with all my questions i have. So my question is, What is the level of oil i need to replace in my forks once there done. If someone can reply back with an answer in cc's i would highly appreciate it. And i would like to know the stock settings for the rebound and compression. Once again thank you to all the people on here who give there time to people like me who are challenged on bike work.
 
Joined
Feb 7, 2007
Messages
22
Likes
0
#2
my manual says(I have a 99)370cc's in each fork for standard. 9 clicks out on the top screw and 11 clicks out on the bottom screws.