have pitbike need stator plate

[momnson39]

Hey there.. maybe somebody can help me.. Have just gotten pitbike for my 11 yr old son.. Seems the stator plate is broke and now it wont start at all.. I am very new to all this and a single mom.. can anyone help me find this part or direct me in the right direction? having the most difficult time.. someone please.... looking forward any info..
:nod:

 

[TheJunkMan]

It would help to know the type of bike. I am asuming its a horizontal clone engine, if so call up Vince at T-Bolt USA if you have any questions, but these should fit. Let him know "the junk man" sent you ;)


Here is a replacement stator plate (reuse your own flywheel, make sure the keyway is not broken)
http://www.tboltusa.com/store/ignition-stator-p-265.html?osCsid=ef536541b1caedc878bdf61073568e80

Or if you want to add some zip to the engine here is an inner rotor kit. Elimintate the large heavy flywheel with a small lightweight one for a faster reving engine. Downside is the engine will stall easier at low rpm and be slightly harder to start with only half kicks. I have one on my SSR90R pit bike.

http://www.tboltusa.com/store/hrc-i....html?osCsid=ef536541b1caedc878bdf61073568e80

Either way you will need this flywheel removal tool.
http://www.tboltusa.com/store/50-flywheel-puller-p-468.html?osCsid=523c783cd275d85ca4c4b4c8e6a01059

 

[momnson39]

thank you so much - junkman - i really appreciate you for this info.. I will follow thru on this.. I will let you know the outcome.. my son is gonna be tickled..

mom = rhonda

 

[TheJunkMan]

Glad to be of help. It will take some mechanical ability and tools to do the job, but its nothing that a bit of research and use of a manual for a Honda CRF50 will cure. Your engine is pretty similar to the CRF50 so dissasembly and reassembly will be virtually the same as far as the stator is concernd.