I pulled the carb of my 03 YZ450 and cleaned it out and checked the float. Now I have it back in but cannot figure out how to get the cable hooked back up on the carb. The cable is basically a loop where on tab hooks in the top of the carb the other hooks in the bottom. Problem is I can hook on side but then do not have enough length to hook the other. What am I missing here, I dont see any where to adjust the cable length so what is the trick to hooking this back up.
Any help would be appreciated I need to get this bike back up and running so that I can go riding.
Jeff
Any help would be appreciated I need to get this bike back up and running so that I can go riding.
Jeff