I was interested in lowering links for my 94 KDX 200 and of course got in touch with Mr. Kouba.
Unfortunately the very nice Mr. Kouba had bad news for me. They do not make a Koubalink for the 1994 and earlier models. My buddy had just purchased a 2001 220 and had a spare set he was willing to part with, and I turned back to the man to get his opinion. He confirmed that the lowering links for the more contemporary bike would be the same length (128mm) as mine had stock, and since that was the longest link he manufactured for a KDX it would do nothing for me.
I was dissapointed but thought, I've been riding it this tall for two seasons, may as well stick with it, until I got a second email from him with an idea! He suggested that I order a set of stock links from a 2003 Suzuki V-STROM-1000 (DL1000)
and bore the holes out to 15mm. A Street bike? A Crotch rocket?? "A SUZUKI???!" "Yes!" he said "They are exactly 140mm and have smaller holes, but easily bored from 12mm to 15 on any standard drill press! Not only that, they are the same thickness as a stock KDX dogbone, so I should be golden!
I called up Bike bandit and had a set ( I think about $40 bucks) shipped right away.
Took the links to my local bike shop since I dont have a press, and for $5 he had them bored out for me.
Got them back from him and 30 minutes later..voila! I can now sit on the seat (I am 5'9 with a 29" inseam) with my feet nearly FLAT on the floor. They lowered the back of my bike about 1". Very nice.
I have a couple of minor complaints... The tailpipe has been "brushed" since the change (I'm also 200lbs), and I audibly heard the tire hit my fender twice on my last visit to the Paragon (I mainly do woods, rocks, and single track up there)
I think a heavier rear spring and maybe some minor tweaking (Including sliding the tubes up the triple clamp in front) will be perfect.
All in all, I strongly recommend this for our vertically, or at least inseam challanged friends out there in the ether!
:clue:
Here is the link for the part.. (Part #13) $13.95 each x 2 + shipping:
http://houseofmotorcycles.bikebandi...el_dept_id~1253800~model_dept_name~DL1000.asp
Unfortunately the very nice Mr. Kouba had bad news for me. They do not make a Koubalink for the 1994 and earlier models. My buddy had just purchased a 2001 220 and had a spare set he was willing to part with, and I turned back to the man to get his opinion. He confirmed that the lowering links for the more contemporary bike would be the same length (128mm) as mine had stock, and since that was the longest link he manufactured for a KDX it would do nothing for me.
I was dissapointed but thought, I've been riding it this tall for two seasons, may as well stick with it, until I got a second email from him with an idea! He suggested that I order a set of stock links from a 2003 Suzuki V-STROM-1000 (DL1000)
and bore the holes out to 15mm. A Street bike? A Crotch rocket?? "A SUZUKI???!" "Yes!" he said "They are exactly 140mm and have smaller holes, but easily bored from 12mm to 15 on any standard drill press! Not only that, they are the same thickness as a stock KDX dogbone, so I should be golden!
I called up Bike bandit and had a set ( I think about $40 bucks) shipped right away.
Took the links to my local bike shop since I dont have a press, and for $5 he had them bored out for me.
Got them back from him and 30 minutes later..voila! I can now sit on the seat (I am 5'9 with a 29" inseam) with my feet nearly FLAT on the floor. They lowered the back of my bike about 1". Very nice.
I have a couple of minor complaints... The tailpipe has been "brushed" since the change (I'm also 200lbs), and I audibly heard the tire hit my fender twice on my last visit to the Paragon (I mainly do woods, rocks, and single track up there)
I think a heavier rear spring and maybe some minor tweaking (Including sliding the tubes up the triple clamp in front) will be perfect.
All in all, I strongly recommend this for our vertically, or at least inseam challanged friends out there in the ether!
:clue:
Here is the link for the part.. (Part #13) $13.95 each x 2 + shipping:
http://houseofmotorcycles.bikebandi...el_dept_id~1253800~model_dept_name~DL1000.asp
Last edited: