Phat Jaun

Member
Jun 9, 2000
14
0
I just installed some new springs in my 2000 kdx 200 and after reassembling the forks, I grabbed the front brake and compressed the the forks a few times and hear a slight click during the rebound. I never tested the forks prior so I don't know if this is normal or not. Thanks
 

shockdoc

Member
May 3, 2001
327
0
You might also check your spring preload. I have seen springs come the wrong length, which could cause some noise if they were a little short.


doc
 
Top Bottom