I'm looking for technical info on popular mods for the KDX220. As I'm outside the US, it's not possible to send away to have the mods done there. My mechanic has more than 25yrs experience with two strokes, he has never worked on a KDX before, however the engine is very similar to the Kawa SuperKIPS, so he should have no trouble working on it.
Firstly I am going to do the top end and was considering milling the head to improve compression. Any advice for doing this? What else is needed for the squish mod?
At some stage I may do the carb. It's a regular PWK33mm, I can easily get it bored to 35mm and am wondering if is worthwhile.
Any suggestions? Thanks!
Firstly I am going to do the top end and was considering milling the head to improve compression. Any advice for doing this? What else is needed for the squish mod?
At some stage I may do the carb. It's a regular PWK33mm, I can easily get it bored to 35mm and am wondering if is worthwhile.
Any suggestions? Thanks!