Has anyone ever converted an SX tranny to a EXC tranny? If so, what kind of parts do you need and how much $$ did you sink into it? The bike I want to convert is a '98 380SX.
Sell & Buy is my advice. Get a '99 EXC. There are a number of reasons why this makes sense. The 99's were better bikes overall. Unless you are just bored, you will have quite a job on your hands.
I think you would need 3rd, 4th, 5th gears to do it. (this is just by gazing at a 2001 fiche mind you). The gears are about $100 per each. So $300, plus either a ton of labor, or a ton of work. I would personally have someone pull the flywheel and do the rest at home if you are mechanically inclined and have a manual or fiche. I doubt it's worth it to most people, but it's your bike and if you can DIY, it shouldn't be terribly expensive.
I can do the work myself, so it would just be the parts cost. I would do it when doing the piston and/or the cylinder decompression hole, while it was torn down. Maybe I am just bored, it rains alot in Oregon.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.