Assembling wheels
Loosen spokes on left, tighten spokes on right, to obtain correct offset position. Then deal with truing up axial run out ( out of round), then deal with transverse run out, loosen left- tighten right or vise versa as needed only in the zone you wish to move.
Prior to doing any of this, loosen every thing up & lube all spokes & nipples with a light oil. When it's all true & straight, gradually tighten to the same torque, by taping on spoke whilst listening for a similar pitch sound with your spoke wrench. good luck, Porkchop.... :cool: