While riding yesterday I tried to shift from 2nd to 3rd and the bike would not go into 3rd. At the same time, the bike cut-off. I got it back to the house and began to investigate. It was not seized and seems to still have good compression. I started for a second and noticed there seems to be a pronounced rattle. I pulled the clutch and found milky oil and lots of coolant in the bottom end. I checked the coolant level and it is almost empty.
I am assuming from reading here in the past it is probably the seals and/or water pump impellar. Does anyone know what all parts I should replace to solve the waterpump problem. As far as the rattle, do you think it is possible the milky oil fried the bottom end bearings? Thanks for any help.
I am assuming from reading here in the past it is probably the seals and/or water pump impellar. Does anyone know what all parts I should replace to solve the waterpump problem. As far as the rattle, do you think it is possible the milky oil fried the bottom end bearings? Thanks for any help.