Does anybody have a fork seal driver for 43 mm forks on my y2k KTM (WP 43mm upside down)
What I am needing is the measurements(sketch) from a 43mm seal driver so I can make my own.
E-MAIL me at: rcers538@cs.com
43X53X10.5 are the dimensions on the seal itself , give it some clearance for the seal lip and make sure the neck is long enough to push the bushing all the way in without bottoming on the end of the tube , the rest is whatever you feel like making
Ask for Dave and tell him Paul sent you! Dave is a great guy and has some great products and service. He LOVES the KTM's and will make most anything for them that needs it. (I know the KTM;s do not need much but some parts are made with weight only in mind and not durability.) Look the 10 gram weight savings for a Al kick stand bolt is not worth it, use steel and make it last however!