Need Measurements(SKETCH)43mm fork seal driver

Joined
Jan 17, 2001
Messages
95
Likes
0
#1
Does anybody have a fork seal driver for 43 mm forks on my y2k KTM (WP 43mm upside down)
What I am needing is the measurements(sketch) from a 43mm seal driver so I can make my own.
E-MAIL me at: rcers538@cs.com
 
Joined
Jun 17, 2000
Messages
106
Likes
0
#2
43X53X10.5 are the dimensions on the seal itself , give it some clearance for the seal lip and make sure the neck is long enough to push the bushing all the way in without bottoming on the end of the tube , the rest is whatever you feel like making

I have a set from 36 to 50mm that I made.
 

Jeremy Wilkey

Owner, MX-Tech
Joined
Jan 28, 2000
Messages
1,453
Likes
0
#3
And you did a good job PT! That clearance is very important on the WP.. The Motion Pr drivers don't work on the KTM's
Jer
 

Jeremy Wilkey

Owner, MX-Tech
Joined
Jan 28, 2000
Messages
1,453
Likes
0
#5
Paul XR..

Indeed suport the home team!! I'll check them out.. I feel stupid for not knowing..

Jer
 
Joined
Jul 29, 1999
Messages
46
Likes
0
#6
Hey Jer,

Ask for Dave and tell him Paul sent you! Dave is a great guy and has some great products and service. He LOVES the KTM's and will make most anything for them that needs it. (I know the KTM;s do not need much but some parts are made with weight only in mind and not durability.) Look the 10 gram weight savings for a Al kick stand bolt is not worth it, use steel and make it last however!