newbie here and really need some help

T

Troyzstang

Member

Oct 18, 2009

2

0

• Oct 18, 2009

• #1

Hello all,
I'm stumped I have a 1992 kdx 200 and just replaced the clutch. Now the clutch won't disengage. It pulls great, plenty of power but it won't disengage when i pull the lever in. I've tried to adjust at both areas. No luck can someone please advise me. Also what is the correct setting for the pressure plate. Could this be my problem?

Help please :bang:

 

Papakeith

COTT Champ Emeritus

Damn Yankees

Aug 31, 2000

6,695

51

RI

• Oct 18, 2009

• #2

Welcome,

I'm going to move this thread over to the KDX forum. I'm sure those guys will give you a helping hand.

 

T

Troyzstang

Member

Oct 18, 2009

2

0

• Oct 18, 2009

• Thread starter
• #3

thanks for the help

 

R

reepicheep

Member

Apr 3, 2009

670

2

• Oct 18, 2009

• #4

This happened to me with a clutch I bought on ebay. It wouldn't disengage until I pulled it out, took the clutch basket completely apart, soaked all the discs in gearbox fluid (I use ATF type F, but whatever you run would be fine) then put it back together.

PITA, but it solved the problem.