kawi, the boy just has a loose screw!
the boy only has a stripped screw© his bike is'nt even broke© I'd just leave it alone till he has a reason to remove the plastic! I was going over my spare tank, last nigh© checking out my inserts, there just brass and brass strippes very easily© so all you have to do is stop the insert from spinning© use your flat tipped srcew driver and gently wedge it between the radiator cover plastic & sert and twist gently, then with the other hand use your 1/4 drive rachet & extsension 8 mm socket and gently remove the bolt© the threads are only brass! once I had the bolt out I'd go to the hardware and buy a metric 6mm bottom tap and clean up the threads ¥ if there's any left¤ or us a heil coil to repare it, the kits about $17 they give you the bit and installion tool plus coils©I was just going over the bike
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?