I was wondering if anybody can give me any (how-to) or (where-to) get information on disconnecting the oil pump on a yamaha pw50? I would just rather use premix so I don't have to worry about the oil pump going bad and messing up the motor. And what ratio would you mix it? Thanks :bang:
pw50 fuel mix?
- Thread starter yam-man
- Start date
ncflattrack
Member
- Feb 18, 2005
- 11
- 0
Pw 50
As far as I know, most of were just capped off at the inlet and the outlet of the pump. Also capping it at the carb also. Physically taking them off would require a block off plate, which I have not seen from any one. As for a ratio I would think 32:1 or 40:1 especially on a air-cooled engine. :nod:
As far as I know, most of were just capped off at the inlet and the outlet of the pump. Also capping it at the carb also. Physically taking them off would require a block off plate, which I have not seen from any one. As for a ratio I would think 32:1 or 40:1 especially on a air-cooled engine. :nod:
