PW80 transmission jerking in 1st gear

H

hillbillypreacher

Member

Mar 17, 2007

6

0

• Mar 18, 2007

• #1

PW80 CARB problem-stuck wide open HELP!

Just bought a 2005 pw 80. When the bike is put into 1st gear(no one sitting on the bike) every 3 or 4 seconds it wants to hunch forward like its been given a small amount of gas(no gas given, at regular idle speed). When he is siting on the bike, it will not hunch forward but you can see the chain raising like the sprocket is trying to turn and go forward. Is there something wrong with the transmission/clutches? Nothing seems to be slipping while he is riding it just the hunching forward when stopped. The carb is dripping gas from the overflow on the bottom of the carb. Could this be whats causing the slight pull forward? There was a heavy child riding the bike before I bought it. This doesnt seem normal to me...whats wrong with it?

Thanks

 

Last edited: Mar 22, 2007

H

hillbillypreacher

Member

Mar 17, 2007

6

0

• Mar 18, 2007

• Thread starter
• #2

HELP! Anyone???

 

Last edited: Mar 19, 2007

2

2 strokes for life

Member

Jan 3, 2007

1,860

0

• Mar 20, 2007

• #3

The roller balls in the clutch are engaging to fast. You need new clutch plates.

 

H

hillbillypreacher

Member

Mar 17, 2007

6

0

• Mar 22, 2007

• Thread starter
• #4

Thanks for the help...now here is one for you!! I took the bowl off of the carb tonight and cleaned it...reinstalled bowl, fired it up and it is stuck wide open!! What did I do wrong? Did I install the the bowl wrong or what??????? But it is not pouring gas out the overflow anymore. :bang:

 

2

2 strokes for life

Member

Jan 3, 2007

1,860

0

• Mar 22, 2007

• #5

I have done this with my quad once before. I used steel wool around the carb slide and the inside where the carb slide is placed. But all along the needle did not go into the hole so the throttle stuck open.

 

H

hillbillypreacher

Member

Mar 17, 2007

6

0

• Mar 22, 2007

• Thread starter
• #6

What is the carb slide and where is it? Whats making it stick open after the cleaning?

 

M

mark808

Member

Aug 22, 2006

55

0

• Mar 22, 2007

• #7

wana sell it my son would love to have it

 

H

hillbillypreacher

Member

Mar 17, 2007

6

0

• Mar 22, 2007

• Thread starter
• #8

not for sale....How do I fix the CARB???

 

2

2 strokes for life

Member

Jan 3, 2007

1,860

0

• Mar 22, 2007

• #9

You take off the carb but leave the top part of it screwed in and then move that little needle that is sticking up into the hole below it. Here is a parts diagram
http://www.yamaha-motor.com/sport/parts/home.aspx
Then pick out your bike and the carb to get a better understanding of it.

 

D

daddyrat

Member

Jun 3, 2007

1

0

• Jun 3, 2007

• #10

My son's PW80 clutch lurches idling in first gear also. I just pulled it apart and the clutch plates were fine. I found that it goes away with the idle turned down. I'm thinking I may try to stretch the springs a bit. Any ideas?

UPDATE... I pulled 4 of the 12 roller balls out of the clutch per the PW performance thread. This is a night a day difference in clutch operation and would recommend it to everyone. It now will idle with no lurching in gear and will give a firm grab as RPM's rise. :yeehaw:

 

Last edited: Jun 3, 2007