katoomster
Member
- Oct 16, 2000
- 8
- 0
Any jetting advice for a 400EXC at altitude (5000-8000 ft). I am coming from 1500-2500 feet, where I have been successfully running an OCEMN #4, 168 main, 1.1 turns out, stock exhaust.
This is just a play ride, so I can tolerate fiddling a little as I go, but I would like to get in the ballpark. Right now it is on the edge of rich on really hot days. Any thoughts? I was thinking about going back to the stock DTM needle, dropping the main to a 165, and going in 1/4 turn on the fuel screw. I also have an EMP that I could play with.
I just want the thing to reasonably well, so any help is appreciated.
This is just a play ride, so I can tolerate fiddling a little as I go, but I would like to get in the ballpark. Right now it is on the edge of rich on really hot days. Any thoughts? I was thinking about going back to the stock DTM needle, dropping the main to a 165, and going in 1/4 turn on the fuel screw. I also have an EMP that I could play with.
I just want the thing to reasonably well, so any help is appreciated.