Kawierider
Member
- Jun 7, 2001
- 281
- 0
hey guys...doing some dissasembly before I sandblast my frame. I am completely done however, I cannot remove the "adjsut nut". The manuel says to use a drift pin and hammer...thats it. Can someone explain to me how it comes off?
does it thread off?
Is it a press fit?
anything else that would help would be great!!
Thanks Guys
Tim
by the way its an 85 kdx240
does it thread off?
Is it a press fit?
anything else that would help would be great!!
Thanks Guys
Tim
by the way its an 85 kdx240