OK this has to have been covered someplace. I just replaced my standard bed (6.5') extended cab with a nice new 4 door truck.
I got the short bed which is about 1' shorter than my old truck.
Here is my question: How do I handle the bikes (2) without dropping the tailgate completely? I am pulling a 21' travel trailer. On the old truck the tailgate would contact the front crank on the trailer if it was all the way down. From some simple measurements I don't see how the tailgate can only be partially dropped.
I know, measure first then spend $42K.............
RAD DAD
I got the short bed which is about 1' shorter than my old truck.
Here is my question: How do I handle the bikes (2) without dropping the tailgate completely? I am pulling a 21' travel trailer. On the old truck the tailgate would contact the front crank on the trailer if it was all the way down. From some simple measurements I don't see how the tailgate can only be partially dropped.
I know, measure first then spend $42K.............
RAD DAD