what else should i do

[mprest4]

i've torn down my bike to the frame and have the top end off for replacement. i am replacing all the swingarm/linkage/wheel bearings and the related seals and bushings. (also the steering bearings)

while i have the motor so far down, are there any other seals i should replace where i don't have to split the cases. like the countershaft, etc. i am replacing all the kips gaskets. what else is fairly simple and should be done?

oh yeah - those swingarm bearings were completely shot...love this forum, it's one of the main reasons i bought a kdx instead of a kx

 

[Matt90GT]

powder coat the frame while it is that far down.

 

[Sage]

new brake fluid?

 

[dirt bike dave]

Might want to replace the water pump seal.

 

[andrew]

do that seal between the airbox and the intake boot. no need to buy a gasket, just use a bit of permatex.