Will a YZ rear sprocket fit a KDX?

[yz250flash]

I am going to do the sprocket change that I have heard so many people recommend. I was going to place a 12 on the front for now and then replace it with the 13/50 combo when I needed new chains and sprockets.

However, I remembered that I had a new chain and sprocket set for my YZs that were stolen. I measured the hole pattern and it seemed the same. Has anyone ever come across this or know if there is a difference. If I can use these it would be great!

 

[andrew]

Why don't you whip off your old ones and try the YZ sprockets for yourself? Beats hanging around waiting for a reply :p

BTW, I use a 12/ 46 combo and I reckon it's the antz pantz...

Cheers
Andrew

 

[yz250flash]

Well since I was at work and the bike was at home...

Besides that with as many knowledgable people as there are on this site I thought someone may be able to answer it without me having to go through the trouble of pulling it apart.

The antz part is kinda right to though. If somebody knew it wouldn't work I was going to order new sprockets online at work. ;)