YZ 250 Stalls

Joined
Aug 6, 2007
Messages
2
Likes
0
#1
My 2002 yz 250 began stalling the last time riding. It was the end of the day and I thought a plug had fouled. The next time riding, I replaced the plug and started the engine. It ran a few minutes and then shut off. Kick started it a few dozen times and it would start and then die. Much like the kill button had been pushed. I removed the tank and checked all the wire connects and the coil ground, but no change. Has anybody had similar problem?
 
Joined
Jul 18, 2007
Messages
58
Likes
0
#2
your float in your carb could be sticking. what did your plug look like when you took it out after it stalled?
 
Joined
Jul 17, 2006
Messages
235
Likes
0
#5
check that it isn't overheating as well, drain the fluid, flush it out and put some fresh stuff in.
 
Joined
Sep 4, 2005
Messages
99
Likes
0
#6
Is fuel flowing through the fuel line fast enough to keep the float bowl full? Perhaps sediment or something blocking the fuel valve.