04 husky wr250 power valve - exhaust valve install question
Here's a quickie.
Should the 2 bearings on that sit on the exhaust shaft fit loosely on the shafts. Seems as though the shaft spins freely inside without spinning the bearings. I tried new bearings as well. Just want to make sure there are no tricks prior to slapping everything back together
Here's a quickie.
Should the 2 bearings on that sit on the exhaust shaft fit loosely on the shafts. Seems as though the shaft spins freely inside without spinning the bearings. I tried new bearings as well. Just want to make sure there are no tricks prior to slapping everything back together
Last edited: