1995 Yz 125

[the_overlooker]

Hey guys, just picked up a 95 Yz 125 from a guy at work who's son is too short to ride it, he has just rebuilt the motor done fork seals swingarm bearings braided front brake line and seat recovering, the mixture screw in the LH side of the carb is loose as and ive been told that 2 full turns out from flush is about where it shold be at, any ideas or advice that can help would be sick!

 

[AV8R]

Two turns out from the bottom maybe but not from flush. Turn the screw all the way in until it bottoms then loosen two turns. I'm guessing were talking about the airscrew?