LoveOUTDOORS
Member
- Apr 14, 2013
- 1
- 0
Hey guys new to forum. But not new to motors and wrenchin on stuff.
I got a CR125 that seems to idle high at time and then fades out and wants to die. Yes I have played with the idle screw on the choke knob. I feel if I turn the idle up any higher it is going to rev way to high while idling.
My air flow screw is turned out 1 and half turns.
Ive rebuilt the top end couple weekends ago. I cleaned air filter and oiled it. Cleaned carb. What else could be causing this problem? Only thing I can think of is something with the jetting or something...? I don't know much about jets and needles.
It was like this last summer but just dealt with it by continuing to rev it well riding so it didn't die while stopped.
Prob gonna go riding next weekend so want it to run better. Gonna rip it up in 2 weekends for sure so needs to be running great then.
I got a CR125 that seems to idle high at time and then fades out and wants to die. Yes I have played with the idle screw on the choke knob. I feel if I turn the idle up any higher it is going to rev way to high while idling.
My air flow screw is turned out 1 and half turns.
Ive rebuilt the top end couple weekends ago. I cleaned air filter and oiled it. Cleaned carb. What else could be causing this problem? Only thing I can think of is something with the jetting or something...? I don't know much about jets and needles.
It was like this last summer but just dealt with it by continuing to rev it well riding so it didn't die while stopped.
Prob gonna go riding next weekend so want it to run better. Gonna rip it up in 2 weekends for sure so needs to be running great then.