cant disengage clutch

[kaosind]

my clutch wont disengage this started when i had been riding for a few hours and it got real hot at that point i just asumed it was heat soak. went riding yesterday for around an hour and the cluch was a bit finicky but no real problem, then today i changed the oil in the tranny ,i used .65L of 10w-30, and then i took it up the block just to test it out and now my clutch has a very hard time disengaging and finding neutral, is this a problem with the cluch plates or is it due to the cable, bike only has about 10 hours of riding on it. thanks for the help

 

[YZ165]

If the cable is adjusted properly, and the clutch will not disengage, you may have problems. Take off the clutch cover and the pressure plate, and tell us what you see. Do the plates move freely? Is the basket grooved? Are the friction plates stuck to the steels? Let us know and we'll try to help. YZ165