Enduro Engineering Clutch Lever

[GREENBUNCH]

I have a 2001 KTM with an enduro engineering clutch lever. The thing is annoying because the adjustment all the way out and the clutch still drags. The bike is new and the clutch works fine without the lever. Any suggestions ? The folks at EE told me it was my clutch ha ha go away buddy .

 

[motojunkie]

The thing is annoying because the adjustment all the way out and the clutch still drags.

Meaning that clutch slips, or when in gear, the bike wants to lurch or creep forward? From what you posted, it sounds like the latter, which means you need to turn the adjuster IN to have the clutch to disengage better. If not, make sure the plastic adjuster is snapped all the way in, then adjust from there.

 

[Unit74]

What is the advantage to this EE lever?

 

[motojunkie]

EE claims 40% less effort to pull the clutch in. It works.