Flag and mount..

Joined
Aug 11, 2003
Messages
85
Likes
0
#1
I bought me a flag recently (a 7foot one) first off will this flag be too short?

Second, I didnt want to buy the mount (15 bucks.. they gotta be out of their mind) So, I went to my dads warehouse and bend a piece of aluminum plates into an L and drilled holes. My question is. Where the heck do these mount up on?

Below is a picture of what i made

http://www.az4.net/Robert/mount.jpg
http://www.az4.net/Robert/mount1.jpg

screw paying 15 bucks for that. I just made one for about 75 cents. just need to know where it mounts so i can make the hole bigger
 

Studboy

Thinks he can ride
Joined
Dec 2, 2001
Messages
1,818
Likes
0
#2
It mounts to either the left or right side of the rear axle.
 
Joined
Mar 6, 2001
Messages
48
Likes
0
#3
I don't think it will be too short. The last time I bought a flag, it was too long and snapped off while I was riding. So i just cut it about a foot and it was fine. While riding you should look back at the flag every so often to make sure its still there in case it does snap (or come) off.

Jon