Recently purchased a 2004 200 and was going to service the front brake. Unfortunately, the phillips head screws holding the top of the master cylinder are stripped, unable to remove with an impact screwdriver.
The master cylinder bowl cannot be purchased separately, it has to be with the entire assay for $160.
I am afraid if I try to drill it out it will will damage the threads in the master cylinder bowl. A small drill/tap will probably break off - at least that is my experience in the past with small screws,
Thanks in advance!
The master cylinder bowl cannot be purchased separately, it has to be with the entire assay for $160.
I am afraid if I try to drill it out it will will damage the threads in the master cylinder bowl. A small drill/tap will probably break off - at least that is my experience in the past with small screws,
Thanks in advance!