Hot Start for yz250f?

[Marklx]

An internet resistant buddy needs help getting his yz started on our hot socal days. Since he won't research, and I got tired of waiting for him while he kicked his brains out:p thought I'd research it a bit.

Do you yz250f guys find the ty davis setup works better than the stock button, or is it just more convenient. Thanks much,

Mark

 

[BikeDstroyer]

It's just more convenient, he may want to check his fuel screw it could be a tad rich or lean...this is very critical on starting the 250F

 

[Marklx]

Should it be leaned out a bit running at 3000 feet (gorman), or is that not enough to matter?

thanks,

Mark

 

[BikeDstroyer]

I don't know about the YZ, but stock setting on the WR is 1 3/4 turns out. Mine is at either 1 1/2 or 1 3/4 and I am running at 5,000 feet.

 

[ACS]

and the bike must be set up to idle. It is a fast idle. Check the factory manual.