KDX200 clutch removal

[bradmo]

Howzit guys.
I have ordered a manual for my 96 kdx200 but I need some help in the mean time. I am trying to remove the main nut on the clutch shaft in order to remove the clutch and get to the kick start gear at the back. It is really tight and I am sure that something is going to break if i pull any harder. Is it a left hand thread and what is a good way of stopping the engine from turning while im trying to remove the nut?
Thanks

Brad

 

[nickyd]

its tight. I use an impact wrench. A clutch hub holding tool works OR a penny wedged b/t the gear does the trick too. check out the JUST KDX forum - good stuff to git r done.