New guy with KDX200 project

[Maddog355]

I just got a 86 KDX200 it is missing alot of parts but I am going to try to get it fixed with the help of the members. (I Hope)

There is a long list of issues but I will try to keep it simple for now.

KIPS valve (I think) cover and some parts seem to be missing. The valve seems to be there and moves in and out freely but there is nothing connecting it to the shaft that comes up out of the crank case. Can I run it at all like this? I plan to try to get it started tomarrow.

Also it needs a seat. Any suggestions on where to get one, or if any of the KX seats will interchange?

 

[KIWI KDX]

hey mate the bike will run with no power valves conected, just dont expect to ride it,
it will have very little power!

but congrats on the bike, lets see some pics of the old beast!!!

 

[Maddog355]

Thanks for the reply. I want to get the Kips system working but I know nothing about it. I know there are a few diffrent manuals but which one is best, And gives the most detail on the KIPS system?

 

[glad2ride]

The Kawasaki one is better, but they are so cheap, you could get both.

 

[Maddog355]

I am thinking I somewhat have this thing figured out. When the plunger is in it helps bottom end and when it is out it helps higher rpm? Or am I backward?

Could you just set it for high rpm and leave it there for a harder hit when the powerband came on?

My last 2 stroke was a 81 YZ125 so I am kinda comparing it that.

 

[_JOE_]

You have the idea. The KIPS or power valve system helps smooth the power delivery by regulating exhaust flow. You can run it with the valve open at the expense of bottom end.

 

[julien_d]

http://www.bikebandit.com/houseofmo...x200c1-us-1986-engine-cover-s/o/m3511sch43270

Check that schematic from bikebandit for the parts you will need. The link will take you directly to the page with the correct diagram loaded. The parts are not too expensive, and it will be very much worth it. You should be able to get you every piece you need right there.

J.

 

[Jmartin]

Ive found two seats for this bike on ebay, just google 1986 KDX200 seat, they will be in shopping results, one was 35 and one was 50