tabutler93

Member
Nov 13, 2006
1
0
2002 CR250R
Any advice on how to test my ignition, I am not getting any spark. I have checked the magnetic ciruit closes as the trigger passes the pulser. I do not know how to check the rest of the ignition.

If I have a bad ignition any recomendations on a new one. I would replace with something better suited for woods riding if needed.
 

MrkCottingham

Member
Aug 19, 2005
17
0
I had that problem with an 01 cr125 and checked everything but couldn't find the problem until I pulled the flywheel and found a wire that was shorting to the flywheel coming from the stator. Good luck and worse case let someone check it out before buying some expensive parts you may not need.

Good luck,
Mark
 
Top Bottom