mxmatthew

Member
Apr 7, 2003
276
0
I've rescently been having some problems with rust on my rear brake disk. After washing I try to dry the disk off as best I can with a rag but it still seems to rust a little bit and it leaves a nice big patch of rust where the pads were while the bike was sitting. Any advise on this? I'm not sure if WD-40 would be good for the pads and if it would affect braking performance. Thanks!
 

Rcannon

~SPONSOR~
Nov 17, 2001
1,886
0
You can also ride the bike and get the brakes hot.

I do this, or use my leaf blower to dry them off. Any moisture on my discs will do the same thing.
 

Peer Lovell

Member
Nov 25, 1999
600
0
Rust between the rotor and the pad is totally normal. Just like on a car with disk brakes.
Ride the brake for a moment after you start riding and this will get it off.
If it really bothers you steel wool will take it off.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

FRESH VIDEO

Top Bottom