<DarreN123>

Member
Jul 21, 2003
31
0
i just came from mountain biking so i know how to true wheels...but the spokes on the rear wheel of my bike are loose and some seem to be seized or something?....i tightened some of them, but a bunch of them wont tighten at all...i go to turn them and the just spring back? i think its about 7 or 8 of them that are seized
 

JonB

Member
Jun 1, 2000
28
0
I've had goo luck heating up the siezed spokes with the blow torch. O course the tire is removed from the rim when doing this. You may need to use a couple sets of vise grips as well. One set on the nipple and one set on the spoke. This will break them loose.
 

<DarreN123>

Member
Jul 21, 2003
31
0
Originally posted by JonB
I've had goo luck heating up the siezed spokes with the blow torch. O course the tire is removed from the rim when doing this. You may need to use a couple sets of vise grips as well. One set on the nipple and one set on the spoke. This will break them loose.


sounds good...ill try the vice grips only first...
 


Top Bottom