- Nov 22, 2000
- 4,392
- 0
I disassembled my steering head last night, and I'm not sure how to remove the lower triple clamp bearing race. Will I need to remove the steering stem via a press, or should I cut the race off with a Dremel?
I'm working on the YZ250F, and the SH bearings are wasted. I left the bike parked for two or three weeks, and when I loaded it into my truck, I found that the steering head bearings were seized. :think: When i took it apart last night, there was NO grease in the bearings. Now I'm gonna have to take the whole bike apart. Dealer 'prep' strikes again.
I'm working on the YZ250F, and the SH bearings are wasted. I left the bike parked for two or three weeks, and when I loaded it into my truck, I found that the steering head bearings were seized. :think: When i took it apart last night, there was NO grease in the bearings. Now I'm gonna have to take the whole bike apart. Dealer 'prep' strikes again.