bedell99

~SPONSOR~
May 3, 2000
788
0
Hello guys,

I have a question about Track tek fuels (Used to be Phillips) I have been using phillips fuels now for about 2 years. Mostly B32/TT111 and was under the impression that was the best fuel offered in colorado for an mx application. I just went to the website and looked at the TDS reports on the distillaion curve. It is horrible, with a large endpoint to boot. Rich or fellow drn'ers, did they change this fuel?? I remember the fuel curve being much lower when it was B32 and better suited for off road applications. Thank you in advance.

http://www.p66race.com/

Erik
 

2strok4fun

Member
Apr 6, 2002
1,085
1
I had the specs on the B32 at

10% 150
50% 215
90% 235

looks like the TT111 at

10% 142
50% 210
90% 256
EP 301

I didnt save the info on the B32 on the end point
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom