V Force on 00 CR125 query

[Zenith]

I ordered a Delta V Force 2 for my 00 CR125 and it has just arrived. The problem is in the blurb I got with it it has the following:

CR125 2001 V2M01A
CR125 87-00 & 02 V2M01

Now I got the V2M01A which clearly isn't for my bike, what I want to know is what is the difference? Will I be able to put it in my 00 because it will take weeks to get a replacement and I've already waited 6 so...


Thanks for ANY help,
Philip

 

[marcusgunby]

Philip the one you have is the best one IMO.It will fit ok-dont worry.Just cut off the rubber wings using a sharp knife and make sure the hole in the rubber manifold lines up with hole in the vo force-if not just shape the hole with a grinding wheel on a drill-its really easy honest.Use 2 gaskets supplied with the v force-one before the v force, and one between the v force and the rubber manifold. the Latest news is the v force works better(bottom and top end) when set to low tension so turn the 2 plates over to the low setting.I lost you e mail address so i couldnt write to you BTW.